Garage Door Problems and Solutions

These days, garage doors have become staples in every home. The convenience of entering the garage with an automatic door makes life simple. It is usually the first thing that people take notice of when they arrive at your home or building. However, these doors need regular maintenance in order to function properly for an extended period and there are some issues that people encounter with them. Here are some of the most common problems. Read more about garage doors Coral Springs FL

Inspect and Lubricate

One common problem is lack of lubrication. Lack of lubrication causes labored movement of parts, noise and eventually damage. If your door is acting up, be sure to inspect the railings and rollers before you panic. It may just need to be lubricated in order to function better. A good lubricant, such as a grease based silicone or lithium spray can work wonders.

Before you can begin lubricating the moving parts, you need to wipe everything so that it’s all clean. Then, apply the lubricant to the parts and see if your door responds well to these moves.

If the rollers or other parts seem stuck, you can try brushing on some kerosene to the parts. If they are rusty, use steel wool to take away the rust and lubricate as usual. If they are badly corroded they may need replacement.

You also need to take a look at the opener. If it is operated by a drive screw or a chain, you may need to lubricate these parts as well.

Does it need Some Adjusting?

Check the sides of the doors for any weather stripping. You may need to adjust the doors as necessary in order to have your unit working properly again.

If the door of your garage is wood, make sure that it has weather stripping. If not, apply weather stripping on the bottom. Touch-ups may be necessary at this point, so that your wooden door doesn’t get stuck again.

Is It Frozen?

During the winter months, ice can form on the door, freezing it into place. This will prevent it from opening and even if you hit the push button repeatedly, it won’t budge. In fact, hitting the push button repeatedly can cause additional damage to parts such as: damaged springs and motors.

The best thing to do in such cases is to apply heat to the bottom and sides using a hair dryer. You can also use other de-icing products to break the ice on the door. Alternatively, you can opt to use a flat shovel to gently remove the ice from underneath the closed unit. Gently chip away the ice so you are careful not to break anything.

Blocked Sensors

Blocked sensors are often mistaken for problems in this area. If you move objects from the sensor area and your door is still having issues, you may need the help of a professional.

Leave a Comment

Your email address will not be published. Required fields are marked *